Safety Operating Procedures for standby generator

standby generator is critical backup power sources and require strict adherence to safety operating procedures. Before starting, ensure the standby generator is placed on a stable, well-ventilated surface, away from flammable materials and the like. The specific matters are introduced as follows.

1、Startup Sequence
Disconnect all loads before starting the standby generator.
Turn the fuel valve to the "ON" position and allow the system to prime.
Engage the starter switch or pull cord smoothly; avoid abrupt movements.
Let the standby generator run idle for 1-2 minutes to stabilize.

2、Operational Monitoring
Regularly check for unusual noises, vibrations, or exhaust smoke.
Maintain a clear perimeter of at least 3 feet around the standby generator during operation.
Never refuel while the standby generator is running—shut it down and wait for cooling.

3、Shutdown & Maintenance
Gradually reduce loads before powering off the standby generator.
Turn the fuel valve to "OFF" to prevent leakage.
Document runtime and perform monthly inspections of oil, filters, and spark plugs.

4、Emergency Protocols
If the standby generator overheats or emits sparks, immediately cut power via the emergency stop button. Always keep a fire extinguisher rated for electrical fires nearby.

By following these procedures, the standby generator will operate reliably while minimizing risks to personnel and equipment.

More information about standby generator:https://huaquanpower.com/